Home

Advanced Materials Science MSc

London, Bloomsbury

With global challenges in climate, environment, healthcare and economy demand, there is increasing need for scientific experts and entrepreneurs who can develop novel materials with advanced properties - addressing critical issues from energy to healthcare - and take scientific discoveries to the commercial world. This degree combines frontline research-based teaching from across UCL to train the next generation of materials scientists.

UK students International students
Study mode
Full-time
UK tuition fees (2024/25)
£15,100
Overseas tuition fees (2024/25)
£37,500
Duration
1 calendar year
Programme starts
September 2024
Applications accepted
Applicants who require a visa: 16 Oct 2023 – 28 Jun 2024

Applications closed

Applicants who do not require a visa: 16 Oct 2023 – 30 Aug 2024

Applications closed

Find similar courses still open

Entry requirements

A minimum of a second-class Bachelor's degree from a UK university or an overseas qualification of an equivalent standard.

The English language level for this programme is: Level 1

UCL Pre-Master's and Pre-sessional English courses are for international students who are aiming to study for a postgraduate degree at UCL. The courses will develop your academic English and academic skills required to succeed at postgraduate level.

Further information can be found on our English language requirements page.

If you are intending to apply for a time-limited visa to complete your UCL studies (e.g., Student visa, Skilled worker visa, PBS dependant visa etc.) you may be required to obtain ATAS clearance. This will be confirmed to you if you obtain an offer of a place. Please note that ATAS processing times can take up to six months, so we recommend you consider these timelines when submitting your application to UCL.

Equivalent qualifications

Country-specific information, including details of when UCL representatives are visiting your part of the world, can be obtained from the International Students website.

International applicants can find out the equivalent qualification for their country by selecting from the list below. Please note that the equivalency will correspond to the broad UK degree classification stated on this page (e.g. upper second-class). Where a specific overall percentage is required in the UK qualification, the international equivalency will be higher than that stated below. Please contact Graduate Admissions should you require further advice.

About this degree

This programme aims to equip students with advanced, comprehensive knowledge of materials science and related state-of-the-art technologies, an understanding of the structure, properties and applications of materials, scientific research skills, and the insight and capability to be an entrepreneur in the field. In addition, students will engage in a literature project and a six-month research project.

Who this course is for

This programme is designed for those with a background in physics, chemistry, chemical engineering, polymers, materials science and engineering, or biotechnology and prepares students for a career discovering the advanced materials that will shape the future of our world.

Read about what it takes to study for a Master's at UCL

What this course will give you

The Advanced Materials Science MSc relates scientific theories to research and applications of advanced materials, encourages innovation and creative thinking, and contextualises scientific innovation within the global market and entrepreneurship. The programme aims to deliver innovative teaching; from the group design projects where students are challenged to design the next advanced material to learning how to apply research in the commercial world. Students on this interdisciplinary programme benefit from UCL's emphasis on research-based learning and teaching and research, including input from departments across the mathematical and physical sciences, and engineering.

Read about what you'll get out of a graduate programme

The foundation of your career

Graduates from this programme are prepared to enter a variety of fields such as aerospace, biomedical, engineering and other multidisciplinary industrials, with students being offered roles at companies including Shell, Johnson Matthey, Rolls-Royce, Merck, Oxford Instruments, Huawei, Bytedance, Procter & Gamble, Coca-Cola.

This programme has also provided students with an excellent foundation for the pursuit of further academic study such as another postgraduate degree or doctoral research. Graduates have gone on to be awarded full PhD studentships in Purdue University in the USA, Universities of Oxford, Queen Mary, Nottingham, Bath, St Andrews, and UCL in the UK, as well as other top universities in Australia and Hong Kong.

Employability

You'll be equipped with the comprehensive knowledge and research skills for a future career as a materials scientist or engineer in academia or industry, or as an entrepreneur.

Networking

Staff at the Institute for Materials Discovery have extensive professional networks and often organize research seminar talks given by internal and external academic and industrial speakers worldwide. Students are strongly encouraged to participate in these scientific seminars. In addition, students are also encouraged to organize their own academic, social and alumni events with staff supports to enhance their sense of belonging.

Accreditation

The Advanced Materials Science MSc has been accredited by the Institute of Materials, Minerals and Mining (IOM3) as meeting the academic requirments for Further Learning for CEng for the intakes 2019-2024 backdated to 2016.

Teaching and learning

The programme will introduce you to the area of advanced material science through a blended mixture of lectures, face to face and online, case study workshops, individual and group activities, and lab practices. You will be expected to supplement material provided by lecturers with your own independent-learning and research, by reading around the subject and by engaging with wider activities in advanced materials science, for example by attending seminars.

The programme’s compulsory curriculum is assessed by a combination of different methods that typically include individual coursework, a group project and/or a written examination, individual research projects with associated presentations, dissertation reports and viva voce. Students are also given time to revise and work through their assessed work with opportunities for individual and group feedback.

Assessment methods vary according to modules and are designed to enable students to demonstrate learning over time.

Each taught module is normally lectured for 30 hours with around 20 hours of tutorials and/or hands-on lab activities. The student is expected to spend around 100 hours on self-directed study for each taught module.

Modules

In Term 1 you will study compulsory modules relating to the Microstructural Control in Advanced Materials, Advanced Materials Processing and Manufacturing, and you will be exposed to the concepts of research design and research methods, thus gaining the necessary knowledge to develop your research project during the year. You will also start optional modules in areas of interest such as Materials and Fatigue, Nanoscale Processing and Characterisation for Advanced Devices, Advanced Topics in Energy Science & Materials, Simulation Methods in Materials Chemistry, and Mastering Entrepreneurship.

In Term 2 you will further develop the skills gained in term 1, where you go on to undertake compulsory modules in Advanced Materials Characterisation, Material Design, Selection and Discovery as well as starting your six-month independent research project on cutting-edge topics regarding advanced materials and related technologies (e.g. novel materials for healthcare and biomedical applications, energy conversion and storage, etc.). You will also study optional module in areas of interest such as Biomaterials for Healthcare & Biomedical Applications.

In Term 3 you will continue to engage in your research project, supported by your project supervisor. This will culminate in you presenting your research progresses and findings to your contemporaries in both written and oral presentation formats.

Compulsory modules









Optional modules








Please note that the list of modules given here is indicative. This information is published a long time in advance of enrolment and module content and availability are subject to change. Modules that are in use for the current academic year are linked for further information. Where no link is present, further information is not yet available.

Students undertake modules to the value of 180 credits. Upon successful completion of 180 credits, you will be awarded an MSc in Advanced Materials Science.

Accessibility

Details of the accessibility of UCL buildings can be obtained from AccessAble accessable.co.uk. Further information can also be obtained from the UCL Student Support and Wellbeing Services team.

Fees and funding

Fees for this course

UK students International students
Fee description Full-time
Tuition fees (2024/25) £15,100
Tuition fees (2024/25) £37,500

The tuition fees shown are for the year indicated above. Fees for subsequent years may increase or otherwise vary. Where the programme is offered on a flexible/modular basis, fees are charged pro-rata to the appropriate full-time Master's fee taken in an academic session. Further information on fee status, fee increases and the fee schedule can be viewed on the UCL Students website: ucl.ac.uk/students/fees.

Additional costs

There are no programme-specific costs.

For more information on additional costs for prospective students please go to our estimated cost of essential expenditure at Accommodation and living costs.

Funding your studies

For a comprehensive list of the funding opportunities available at UCL, including funding relevant to your nationality, please visit the Scholarships and Funding website.

See all the ways you can fund your studies

UCL East London Scholarship

NOW CLOSED FOR 2024/25 ENTRY
Value: Tuition fees plus £15,700 stipend ()
Criteria Based on financial need
Eligibility: UK

Next steps

Students are advised to apply as early as possible due to competition for places. Those applying for scholarship funding (particularly overseas applicants) should take note of application deadlines.

There is an application processing fee for this programme of £90 for online applications and £115 for paper applications. Further information can be found at Application fees.

When we access your application we would like to learn:

  • why you want to study Advanced Materials Science at graduate level
  • why you want to study Advanced Materials Science at UCL
  • what particularly attracts you to the chosen programme
  • how your academic and professional background meets the demands of this challenging programme
  • where you would like to go professionally with your degree

Together with essential academic requirements, the personal statement is your opportunity to illustrate whether your reasons for applying to this programme match what the programme will deliver. Applicants who have a portfolio are strongly recommended to submit it when they apply.

Please note that you may submit applications for a maximum of two graduate programmes (or one application for the Law LLM) in any application cycle.

Got questions? Get in touch

Faculty of Mathematical and Physical Sciences
Faculty of Mathematical and Physical Sciences

imd-office@ucl.ac.uk

UCL is regulated by the Office for Students.